Reliable Packing Machine Manufacturer!


Recommend Products

Maintenance for Granule Packing Machine2018-01-16 By Diana

Granule packing machine has complex mechanical structures and institutions, run faster and coordinates the movement request high, granular packing machine actuators of power is generally small, so the motor power is small, granular packing machine generally adopts stepless speed change device, can easily adjust the speed of packaging, to adjust production capacity.
Granule Packing Machine
Granule packing machine is a special professional machine, its advantage is variety, production quantity is limited, for ease of manufacturing and maintenance, reduce equipment investment, in the process of particle packing machine design standardized parts, versatility and versatility, granular packing machine automation degree is high, most of them adopt PLC and single-chip microcomputer control, automatic intelligent. It greatly improves the production efficiency, improves the production conditions, improves the working environment, reduces the cost, with beautiful appearance. For the health and safety of the products, the particle packaging machine can not only reduce the area of the packaging, also extend the shelf life of the product.
Precautions for Use and Maintenance of Granule Packing Machine
1. The machine should be kept in a dry and clean indoor environment, and should not be used in the atmosphere with acid or other places with corrosive gas circulation.
2, Regularly check parts, once every month, check the worm gear, worm, bolts on lubrication, bearings and other activities whether some flexible rotation and wear situation, found that defects should be timely repair.
3. After the machine is finished or stopped, the rotating drum should be removed to clean and brush the remaining powder in the bucket, and then install it to prepare for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw on the front bearing pawn to the appropriate position. If gear shaft moving, please adjustment bracket M10 screw back to the appropriate location and adjust the clearance to the bearing noise does not occur, hand belt pulley, elastic appropriate advisable, too tight or too loose all can make the machine may be damaged. 5. If the downtime is longer, the machine must be wiped clean, and the surface of the machine should be coated with anti-rust oil and covered with a cloth cover.


Leave Message

Number Change